IntesisBox KNX - Mitsubishi Electric AC is a communication gateway for integrating Mitsubishi Electric air conditioning systems into KNX TP-1 (EIB).

The IntesisBox KNX continuously polls (reads) the Mitsubishi Electric control interface (AG-150, GB-50, AE-200, EB-50 or similar) for all configured signals and stores the updated status of all of them in its memory, ready for operation. supplied upon request from KNX.

On the KNX side, IntesisBox imitates a KNX device and acts as if it were another device in the KNX system.

The KNX EIB IntesisBox interface is connected directly to the EIB bus and is opto-isolated from the rest of the internal electronics. Any point in IntesisBox can be customized for different functions.

To allow read requests, allow write requests, automatically send a write request to the KNX bus when its value changes, and send a read request to the KNX bus when IntesisBox starts or after a bus reset.

For each point, you can define one main group address and different listening group addresses. This useful function allows you to perform actions on the same internal point from several KNX group addresses.